Yep, you read that right! The story behind my new creation (not sure if it's totally new but I've never heard of it...) is last night I made spaghetti with steamed broccoli and cauliflower instead of pasta. Well the twins refused to eat it and they loved it the last time I made it... So I was going to make them eggs because that was the quickest thing I could think of and they would eat that for sure. So I'm mixing up the eggs and I put real bacon bits in it for more protein. I was feeling bad because I haven't been able to get them to eat their vegetables lately which is why I made the veggie spaghetti in the first place! Anyway, I decided to add some of the veggie spaghetti to the eggs. I just used little pieces of the broccoli, cauliflower and some of the chunks of the tomatoes from the sauce. Well when I went to serve it to them I wanted to taste it and make sure it wasn't to hot. It was so good and the twins loved it!!! So this morning for breakfast I made it for myself again except I did it a little different.
My "recipe" for pasta sauce eggs:
Ingredients:
Probably serves 2-3 people
-6-8 Eggs
-About a 1/4 cup of your favorite pasta sauce (you can do less if you want)
-4 sliced or diced grape tomatoes
-splash of milk (I always add it to my eggs)
- 1/3 cup of real bacon bits or sausage (thats really up to you)
-salt & pepper to taste (optional) * I didn't use either and I would add this after cooking the eggs
Directions:
Mix all the ingredients in a bowl and pour into a nonstick skillet or spray skillet with cooking spray. Cook on low heat until done. Mine was a little runny but I could tell it was because of the pasta sauce. When it's done serve it immediately :)
Note: I made the veggie spaghetti with Bertolli tomato and basil sauce and this morning I used the Bertolli olive oil and garlic. I think I liked the tomato and basil better.
Thanks and God Bless:)
Friday, September 21, 2012
Monday, September 10, 2012
Make your own witch hat
It was pretty easy to make and I actually had everything I needed to make it:)
Supplies:
Fabric stabilizer
Fabric to cover the hat
505 spray adhesive
Hot glue gun
Stapler
Pen
Scissors
Glitter paint (if desired) & paint brush
First, I cut the stabilizer to make a cone shape. You can do this by twisting the stabilizer into a cone and then tracing where the seam is to know where to cut. Then I cut out the fabric to be a little bigger than the stabilizer so I could fold it over the edges. Next I sprayed the 505 spray on the stabilizer and pressed it down on the fabric. Then I hot glued the edges of the fabric down. After that I hot glued the cone together.
For the bottom of the hat I drew and cut out a semi circle with the stabilzer. I cut out 2 pieces of fabric for this part. One a little bigger than the stabilizer and one the same size. I did the bigger piece first and folded the edges over. I secured the edges with hot glue onto the other side. I did spray the side of the the stabilizer that I was working on with 505 spray and then pressed it on to the fabric before hot gluing the edges. Then I sprayed the other side of the stabilizer and pressed it down on the fabric circle. I hot glued the loose edges.
To attach the cone to the bottom of the hat I used hot glue and lined the inner rim of the cone with hot glue and pressed it down in the middle of the circle with the seam facing the back.
To make the hat look worn I stapled the hat in a few places on back side of it while I pinched it together.
To make it glitzy I painted the whole thing with glitter paint which helped it to stiffen a bit more.
I hope this makes sense! Let me know if you have any questions! Email me at daisymade@yahoo.com
Thanks and God Bless
Supplies:
Fabric stabilizer
Fabric to cover the hat
505 spray adhesive
Hot glue gun
Stapler
Pen
Scissors
Glitter paint (if desired) & paint brush
First, I cut the stabilizer to make a cone shape. You can do this by twisting the stabilizer into a cone and then tracing where the seam is to know where to cut. Then I cut out the fabric to be a little bigger than the stabilizer so I could fold it over the edges. Next I sprayed the 505 spray on the stabilizer and pressed it down on the fabric. Then I hot glued the edges of the fabric down. After that I hot glued the cone together.
For the bottom of the hat I drew and cut out a semi circle with the stabilzer. I cut out 2 pieces of fabric for this part. One a little bigger than the stabilizer and one the same size. I did the bigger piece first and folded the edges over. I secured the edges with hot glue onto the other side. I did spray the side of the the stabilizer that I was working on with 505 spray and then pressed it on to the fabric before hot gluing the edges. Then I sprayed the other side of the stabilizer and pressed it down on the fabric circle. I hot glued the loose edges.
To attach the cone to the bottom of the hat I used hot glue and lined the inner rim of the cone with hot glue and pressed it down in the middle of the circle with the seam facing the back.
To make the hat look worn I stapled the hat in a few places on back side of it while I pinched it together.
To make it glitzy I painted the whole thing with glitter paint which helped it to stiffen a bit more.
I hope this makes sense! Let me know if you have any questions! Email me at daisymade@yahoo.com
Thanks and God Bless
Labels:
DIY,
Halloween,
Witch hat,
wizard of oz,
WOZ
Subscribe to:
Posts (Atom)




